Prosthetic

  

   

Gingiva Formers (TA):

Titanium

  • Platform seated abutment for easy manipulations
  • Metal abutment available in multiple heights and diameters

Peek

  • Platform seated abutment for easy manipulations
  • PEEK can be easily adjusted chairside for custom tissue healing
  • Two-piece gingiva former in plastic and 1.5° taper for use with screw
  • Available in multiple heights and diameters

Torque Recommendations

  • 10 Ncm (2mm patform PEEK or titanium)
  • 15 Ncm (3mm & short platform PEEK or titanium)
     
   

Temporary Abutments (PA):

  • Provisional dental prosthesis abutment
  • Abutment contour can be individually adapted, prepped or milled
  • Red or Yellow Transfer caps allow for exact closed tray impressions
  • Provisional Gingival caps are also available
  • Transfer cap sold separately 
  • Available Gingival Heights: (GH) - 1.5
  • Available Angulations: 0° - 10° - 15° 

Torque Recommendations

  • 5-10 Ncm (2mm patform)
  • 10-15 Ncm (3mm platform)
     
   

Temporary Abutments (TPA):

Titanium

  • Provisional dental prosthesis abutment
  • A simple, esthetic and long-term solution for soft tissue management
    during the healing period
  • Abutment contour can be individually adapted, prepped or milled
  • Expanded indication up to 180 days in the mouth

Peek

  • Provisional dental prosthesis abutment
  • A simple, esthetic and long-term solution for soft tissue management 
    during the healing period
  • Abutment contour can be individually adapted, prepped or milled
  • PEEK polymer material can be modified
  • Expanded indication up to 180 days in the mouth

Torque Recommendations

  • 5-10 Ncm (2mm patform)
  • 10-15 Ncm (3mm platform)

 

     
   

Preform Abutments (EAK):

  • For cement or screw-retained prosthetics
  • The red 2mm platform is for single unit anterior teeth or posterior
    splinted restorations only
  • Abutment can be individually prepped or milled
  • Precision-Fit Snap caps for accurate closed tray transfer over the Abutment and Open Tray Transfer Post
  • 1.5° Conical Connection for stability and bacterial seal 
  • Available Gingival Heights: 0.5 - 1.5 - 3.0 - 4.5 mm
  • Available Angulations: 0° - 10° - 15°

Torque Recommendations

  • 15-20 Ncm (2mm patform)
  • 25-30 Ncm (3mm platform)
     
   

Anatomic Abutments (AA):

  • Abutment is ideal for cemented dental prosthesis
  • Abutment can be individually prepped or milled
  • Anatomical abutment shoulder is ideal for highly esthetic cases
  • 1.5° conical connection for stability and bacterial seal
  • 30° abutments are to be used in splint restorations only, do not use in single tooth restoration
  • Available Gingival Heights: 0.5 - 1.5 - 3.0 - 4.5 mm
  • Available Angulations: 0° - 10° - 20° - 30°

Torque Recommendations

  • 15-20 Ncm (2mm patform)
  • 25-30 Ncm (3mm platform)
     
   

Ti-Base Abutments (KSA):

  • Abutment for fabrication of an individual cemented or screw retained zirconium prosthesis with emergence profile using CAD-CAM techniques
  • Scan caps and scan bodies available for a digitized implant positioning and abutment placement
  • Anti-rotational scan cap assured by a notch at the base of the abutment
  • Circular platform of the abutment fulfills the highest esthetic demands
  • Abutment cylinder height ensures a good cemented connection of the
    milled zirconium structure
  • Available in different gingival heights and angulations
  • 1.5° conical connection for stability and bacterial seal
  • Available Gingival Heights: 0.5 - 1.5 - 2.5 mm
  • Available Angulations: 0° - 10° - 20° 

Torque Recommendations

  • 15-20 Ncm (2mm patform)
  • 25-30 Ncm (3mm platform)
     
   

Cerec Abutments (CS):

  • Abutment for chairside fabrication of cemented or screw retained ceramic prosthesis using CEREC technology
  • Scan bodies for Bluecam S and Omnicam S available for a digitized implant positioning and abutment placement
  • Anti-rotational scan body assured by a notch at the base of the abutment
  • Circular platform of the abutment fulfills the highest esthetic demands
  • Abutment cylinder height ensures a good cemented connection of the milled zirconium structure
  • 1.5° conical connection for stability and bacterial seal 
  • Available Gingival Heights: 0.5 - 1.5 mm

Torque Recommendations

  • 15-20 Ncm (2mm patform)
  • 25-30 Ncm (3mm platform)
     
   

Lingual Screw-Retained Abutments (EAZ):

  • This abutment is ideal for screw-retained crowns as it avoids the occlusal access hole
  • Horizontal lingual set screw fixes the crown to the abutment
  • Abutment requires a horizontal lingual set screw and screw ring (not included)
  • 30° abutments are to be used in splint restorations only, do not use in single tooth
  • restorations
  • Available Gingival Heights: (GH) 0.5 - 1.5 mm
  • Available Angulations: 0° - 10° - 20° - 30° 

Torque Recommendations

  • 15-20 Ncm (2mm patform)
  • 25-30 Ncm (3mm platform)
     
   

Transmucosal Abutments (VBA):

  • Available overdenture and screw-retained prosthesis (i.e. crowns, bridges and bar)
  • Do not use in single tooth restorations, except splinted prosthesis
  • All abutments required a prosthetic screw (not included)
  • All straight transmucosal VBA abutments required a transmucosal insertion instrument
  • All angled abutments require an abutment screw (not included) 
  • Abutments cannot be altered
  • Available Gingival Heights: (GH) 0.5 - 1.5 - 2.5 - 3.5 mm
  • Available Angulations: 0° - 20° - 30°

Torque Recommendations

  • 15-20 Ncm (Abutment); 5-10 Ncm on prosthetic screw (2mm patform)
  • 25-30 Ncm (Abutment); 5-10 Ncm on prosthetic screw (3mm patform)
     
   

Multi-Base Abutments (MB):

  • Removable overdenture abutment and screw retained prosthesis
  • 1.5° Conical Connection
  • Each multi-base abutment connector requires a screw specific to the gingival height
  • Abutments may not be changed, milled or prepped

Torque Recommendations

  • 15-20 Ncm  (2mm patform)
  • 25-30 Ncm  (3mm patform) 
     
   

Finder Abutments (FLA):

  • Removable overdenture restoration abutment
  • 1.5° conical connection for bacterial sealed connection with bone and papilla-retention
  • Finder Insert Caps: inserts with various retentions
  • Abutments may not be changed, milled or prepped
  • Only for splinted prosthesis, do not use in single tooth restorations 

Torque Recommendations

  • 15-20 Ncm  (2mm patform)
  • 25-30 Ncm  (3mm patform) 
     
   

O-Ring Abutments (KKA):

  • Abutment for removable overdenture restorations
  • Gingival & implant carried o-ring/ball-top prosthesis
  • 1.5° conical connection for bacterial sealed connection with bone and papilla-retention
  • Primary Abutment: one-piece abutment with integrated screw
  • O-Ring Caps: inserts with various retentions (open or closed)
  • Abutments may not be changed, milled or prepped
  • O-Rings available in 4 different degrees of hardness
  • Available Gingival Heights: (GH) 0.5 - 1.5 - 3.0 - 4.5 mm

 Torque Recommendations

  • 15-20 Ncm  (2mm patform)
  • 25-30 Ncm  (3mm patform)